SITEK offers new and refurbished Spin Rinse Dryers (SRDs) for many industries and applications. We are industry experts in semiconductor wafer cleaning, contact us with any questions.
Showing 1–15 of 180 results
Spin Rinse Dryers are designed to clean and dry semiconductor wafers after various processing steps. They use a combination of centrifugal force, rinse water, and sometimes heated nitrogen to remove particles and contaminants from the wafer surfaces without leaving water marks or residues.
The primary goal is to achieve high cleanliness levels and dry wafers efficiently to prepare them for subsequent manufacturing steps, such as photolithography, etching, or chemical vapor deposition.
Key considerations include the types and sizes of substrates to be processed, the level of cleanliness required, throughput needs, and compatibility with existing production lines. Additional factors might include the dryer’s footprint, energy consumption, maintenance requirements, and the ability to customize settings and inserts for specific applications
SRDs are versatile and can handle a wide range of substrates including semiconductor wafers, glass plates, and other flat substrates used in electronics, photovoltaics, and similar high-tech industries. The specific types and sizes of substrates that can be processed depend on the machine’s design and the available inserts or rotors.
Learn how to replace a labyrinth seal and clean the motor shaft on a SITEK or Semitool Spin Rinse Dryer with this step-by-step tutorial from SITEK technician Shawn Lingo.
SITEK shows how to replace the anti-static unit on a SITEK / Semitool Spin Rinse Dryer. Whether you’re upgrading from a legacy CY20 model or installing a modern SITEK Static Eliminator with a dedicated power module, this video walks you through each step of the process.
SITEK demonstrates how to remove and reinstall the SITEK SlickDevice™ SRD Controller — a powerful upgrade for legacy PSC 101 units. With only two tools and five minutes, you can get your Spin Rinse Dryer running smarter and more efficiently.
If your Spin Rinse Dryer rotor isn’t stopping at 12:00, this guide walks you through aligning the cam, encoder wheel, and RSP sensor on a SITEK/Semitool 8300 SRD. Learn how to lock the rotor in place, verify notch alignment, and tighten all key hardware. Watch the full video to see the process in action.
Learn how to activate the Nitrogen Purge Saver feature on the SITEK SlickDevice™ SRD Controller in just a few taps. Start saving thousands in wasted N2 while taking advantage of advanced controller features like SECS/GEM support and built-in analytics.
Learn how to safely remove and reinstall a QD rotor on a SITEK / Semitool Spin Rinse Dryer. This step-by-step guide explains proper rotor alignment, torque technique, and how to avoid damaging your motor. Includes video link and support options.
This guide explains how to properly adjust and install the tach sensor on a SITEK / Semitool Spin Rinse Dryer. Learn how to align the sensor with the encoder wheel, avoid shorts, and ensure accurate RPM readings. Watch the video or follow the step-by-step instructions.
Learn how to properly remove and install the N2 ACR Valve on a SITEK / Semitool Spin Rinse Dryer. This guide includes disconnection steps, hardware transfer, valve orientation, and reconnection—ensuring a reliable nitrogen supply. Watch the full video for a visual walkthrough.
Learn how to replace the door window and seal on your SITEK / Semitool Spin Rinse Dryer. This guide walks you through removing the old parts, installing the new components, and verifying a proper seal using the SITEK SlickDevice Controller or standard process testing. Watch the full video tutorial to follow along step by step.
Learn how to replace the N2 filter on your Semitool Spin Rinse Dryer with this step-by-step guide. From disconnecting fittings to installing the new filter with the correct orientation, this quick tutorial will walk you through the process to keep your SRD running smoothly.
Learn how to fix a misaligned door on your Semitool Spin Rinse Dryer with this quick step-by-step guide. From diagnosing rubbing issues to making precise hinge adjustments, we cover everything you need to realign your SRD door smoothly. Prefer video? Watch the full tutorial on our YouTube channel.
This guide walks you through replacing the N2 purge saver valve on a Semitool SRD, from removing tubing and fittings to mounting and wiring the new valve. Includes helpful tips and required tools for a smooth install. Watch the full video or follow the written steps.
